|
DC-DC Converter -> Step-down Simple Switch
| |
Solution:
|
 DataSheet
|
| |
AX3022
|
General Description |
| The AX3022 series are monolithic IC designed for a step-down DC/DC converter, and own the ability of driving a 1.5A load without additional transistor. It saves board space. The external shutdown function can be controlled by logic level and then come into standby mode. The internal compensation makes feedback control having good line and load regulation without external design. Regarding protected function, thermal shutdown is to prevent over temperature operating from damage, and current limit is against over current operating of the output switch. If current limit function occurs and VFB is down below 0.5V, the switching frequency will be reduced. The AX3022 series operates at a switching frequency of 200KHz thus allow smaller sized filter components than what would be needed with lower frequency switching regulators. Other features include a guaranteed +3% tolerance on output voltage under specified input voltage and output load conditions, The chips are available in a standard SOT89-5L package. |
|
Features |
|
Input Range:24V(Max)
12to3.3(2A)Efficiency:80(1A)
12to5(2A)Efficiency:84(1A)
Availability:NOW
Features:b,c,e,f
Frequency:200Khz
Output Current:1.5A
Output Voltage:Adj(0.75)
PackageType:SOT89-5L
AX3022
Stanby Current:2uA
|
|
|
Typical Application |
 |
|
AX3022 buck converter 1.5A 200KHz |
The AX3022 series are monolithic IC designed for a step-down DC/DC converter, and own the ability of driving a 1.5A load without dditional transistor. It saves board space.
The external shutdown function can be controlled by logic level and then come into standby mode. The internal compensation makes feedback control having good line and load regulation without external design. Regarding rotected function, thermal shutdown is to prevent over temperature operating from damage, and current limit is against over current operating of the output switch. If current limit function occurs and VFB is down below 0.5V, the switching frequency will be reduced.
The AX3022 series operates at a switching frequency of 200KHz thus allow smaller sized filter components than what would be needed with lower frequency switching regulators. Other features include a guaranteed +3% tolerance on output voltage, The chips are available in a standard SOT89-5L package.
|
|
|
|
DataSheet